150A battery sensor

150A battery sensor High accuracy Good linearity Low thermal drift Good current overload capability Conform to UL94-V0 stand

150A battery sensor

Applications:For the electronic measurement of currents: AC, DC IMPL.,etc.,with galvanic isolation between theprimary (high power) and the secondary (electronic) circuits.

Main technical data:1. Primary normal current IPN: 150A r.m.s2. Primary current, measuring range IP: 0~+/-200A3. Measuring resistance: RMmin RMmaxwith +/-15V @ +/-200A max: 0 ohm 15 ohm4. Secondary normal current: 75mA rms5. Conversion ratio: 1:20006. Supply voltage(+/-5%): +/-15V7. Current consumption: 16mA+ Secondary output current8. Isolation test: Between the primary circuit to the secondary circuit(+.-.M):2.5kVrms/50Hz/1min

Accuracy – Dynamic performance data:1. Accuracy @ IPN, TA=+25 oC , @+/-15V: +/-1%2. Non-linearity: better than +/-0.25%3. Offset current Io: not more than +/-0.2mA(@+25oC)4. Residual current @ IP=0, TA=+25 oC, after an overload of 1xIP: +/-0.15mA5. Thermal drift of Io: +/-0.005mA/K6. Response time: not more than 1us7. dI/dt accurately followed: better than 200A/us8. Frequency Bandwidth (-1dB): DC 0..150kHz

General data:1. Operating temperature: -10ºC~+80ºC2. Storage temperature: -15 oC ~+85 oC3. Secondary coil resistance: not more than 120 ohm4. Weight: 25g5. Standards: EN 50178

Features:1. Hall effect measuring principle2. Galvanic isolation between primary and secondary circuit3. Insulated plastic case made of white PPO recognized according to UL 94-V04. The whole current transducer comply with RoHS Directive completely

150A battery sensor