NT15-P UPS hall sensor

UPS hall sensor High accuracy Good linearity Low thermal drift Good current overload capability Conform to UL94-V0 standard

UPS hall sensor

Application                                           

For the electronic measurement of currents: AC, DC IMPL.,etc.,with galvanic isolation between the primary (high power) and the secondary (electronic) circuits.

Electrical data:

1. Normal current IPN:  15A rms

2. Measuring range IP:  0~+/-48A

3. Number of secondary turn:  2000

4. Load resistance RL:  not less than 2000 ohm            

5. Supply voltage (+/-5%): +5V

6. Current consumption( at +5V): 28+Is+(Vout/ RL)  mA

7. Isolation:  Between primary and secondary:  3kV rms/50Hz/1min

Accuracy – Dynamic performance data:

1. Accuracy X @IPN ,TA=+25ºC +/-0.7%

2. Non-linearity:  +/-0.1%(+25ºC)

3.Offset of zero current: 2.5V±0.025V(+25ºC)

4. Thermal drift: @-40ºC~+85ºC:≤300ppm/ºC

5. Response time ≤400ns

8. di/dt accurately followed:  ≥35A/us

  General data:

1. Operating temperature:   -40ºC~+85ºC

2. Storage temperature:     -40ºC~+100ºC

3. Weight:   10g

4. Standards:  EN50178:1997

Features:

1. Zero magnetic flux Hall effect principle

2. Single-circuit power supply

3. Insulated plastic case made of white PPO recognized according to UL 94-V0

4. The whole current transducer comply with RoHS Directive completely

NT15-P UPS hall sensor